WARNING: CHOKING HAZARD Keep out of reach of small children! Note that these ARE NOT TOYS, AND ARE NOT INTENDED FOR USE BY CHILDREN UNDER AGE OF 14. These products are Model Railroad Equipment and Accessories intended for use by adults.
Note About Shipping: The cost on the shopping cart does not include shipping. See the Shipping page for shipping information.
New! - White M3 Half-track Kit
|
M3N |
|
|
The White M3 half-track was an armored personnel carrier widely used by US and it’s Allies during WW2. Derived from the M2 half-track car, the M3 was extensively produced, with about 15,000 standard M3s and more than 38,000 variant units manufactured.
The kit includes a 3D printed chassis, a 3D printed body and a decal sheet.
Download the PDF Instruction Sheet.
Photo of Finished Kit:
Studebaker US6 2 1/2 Ton Dump Truck Kit
|
Kit |
|
|
Production of the US6 truck started in 1941 and over 200,000 were built during World War 2. Over 150,000 were exported under the lend-lease program mostly to Russia. The US military used these trucks in the construction of the Burma Road and in North America on the Alcan (Alaska) highway. This is a 3 piece kit which includes a 3D printed chassis, a 3D printed cab and 3D printed dump bed. Also included, 1 decal sheet.
Download the PDF Instruction Sheet.
Photo of Finished Kit:
GMC CCKW 2 1/2 Ton Tanker Truck Kit
Introduced in April 1943 the canvas covered cab version of the CCKW military truck replaced the earlier metal closed cab type. Over 155,000 of these trucks were produced. This is a 3 piece kit which includes a 3D printed chassis, a 3D printed cab and 3D printed tanker bed. Also included, 1 decal sheet.
This is the fuel tanker version of the CCKW.
Download the PDF Instruction Sheet.
Photo of Finished Kit:
GMC CCKW 2 1/2 Ton Cargo Truck Kits
Introduced in April 1943 the canvas covered cab version of the CCKW military truck replaced the earlier metal closed cab type. Over 155,000 of these trucks were produced. This is a 3 piece kit which includes a 3D printed chassis, a 3D printed cab and 3D printed cargo bed. Also included, 1 decal sheet.
This kit is available in 8 different configurations:
1. Open bed, closed hood, with a winch mounted behind the front bumper.
2. Open bed, closed hood, with no winch.
3. Open bed, open hood, with a winch mounted behind the front bumper.
4. Open bed, open hood, with no winch.
5. Covered bed, closed hood, with a winch mounted behind the front bumper.
6. Covered bed, closed hood, with no winch.
7. Covered bed, open hood, with a winch mounted behind the front bumper.
8. Covered bed, open hood, with no winch.
Download the PDF Instruction Sheet.
Photos of Some Finished Kits:
Studebaker US6 2 1/2 Ton Cargo Truck Kit
Type
Production of the US6 truck started in 1941 and over 200,000 were built during World War 2. Over 150,000 were exported under the lend-lease program mostly to Russia. The US military used these trucks in the construction of the Burma Road and in North America on the Alcan (Alaska) highway. This is a 3 piece kit which includes a 3D printed chassis, a 3D printed cab and 3D printed cargo bed. Also included, 1 decal sheet.
Download the PDF Instruction Sheet.
Photo of Finished Kit:
Home
Page Shipping
Contact
Find a
Retailer
Follow us
