WARNING: CHOKING HAZARD Keep out of reach of small children! Note that these ARE NOT TOYS, AND ARE NOT INTENDED FOR USE BY CHILDREN UNDER AGE OF 14. These products are Model Railroad Equipment and Accessories intended for use by adults.
Note About Shipping: The cost on the shopping cart does not include shipping. See the Shipping page for shipping information.
NEW! - 1955 Chevy Trucks
This kit contains all parts needed to build 2 complete 1955 Chevy trucks: a 2 ton model 6100 (130 inch wheelbase) with custom bodywork for milk delivery and a 2 ton model 6400 (154 inch wheelbase) bucket truck for power line maintenance.
3D printed parts Included in the kit:
A. 2 chassis
B. 1 cab
C. 1 milk truck body
D. 1 bucket truck bed
E. 1 bucket lift
Also includes:
1 photo-etched ladder
1 decal sheet
Download the PDF Instruction Sheet For 1955 Chevy Trucks
Photo of the finished kits:
Dodge Power Wagon Tow Truck Kit
The Dodge Power Wagon was mechanically derived from the WC series of 3/4 ton military trucks. Introduced in 1946 as the first postwar civilian production 4x4 truck; it featured an enclosed all-weather cab, an 8-foot cargo bed, 126 inch wheelbase and a 230 cubic inch flathead inline-six engine.
In addition to the 3D printed parts, this kit features a set of photo-etched parts. This kit is not suitable for beginners, recommended for experienced builders only.
3D printed parts Included each kit:
A. 1 chassis
B. 1 cab/tow bed
Also includes:
1 photo-etched set
1 decal sheet
Download the PDF Instruction Sheet For The Power Wagon Tow Truck
Photos of the finished kit:
Ford C Series Truck Kits
These kits are scale models of 1957 C series trucks. The kit contains all the parts needed to build 2 complete trucks. One truck is a propane tanker and the other is a race car transporter (with a drag racer).
3D printed parts Included each kit:
A. 2 chassis
B. 2 cabs
C. 1 propane bed
D. 1 transporter bed
E. 1 drag racer
Also includes 2 decal sheets
Download the PDF Instruction Sheet For The Propane Truck
Download the PDF Instruction Sheet For The Transporter Truck
Photos of the finished kits:
Ford F8 Semi Tractor Kits
These kits are scale models of the 1951 F8 series semi tractors. The kit contains all the parts needed
to build 2 complete tractors. There are 2 versions of the tractor, one with the “fifth wheel” and one compatible with
Marklin trailers.3D printed parts Included each kit:
A. 2 chassis
B. 2 cabs
Download the PDF Instruction Sheet
Photo of the fifth-wheel version finished kit:
Photo of the Marklin version finished kit with the trailer from the 82340 set:
Ford F6 Truck Kits
Set #1 - Fuel tanker and cube truck
Set #2 - Garbage truck and dump truck
These are scale models of the 1951 Ford F6 series medium duty trucks. The kits include all the parts needed to build 2 complete trucks. Set #1 contains: a tanker for fuel oil delivery and a cube truck for appliance delivery. Set #2 contains: a garbage compactor truck and a dump truck.
3D printed parts Included each kit:
A. 2 chassis
B. 2 cabs
C. 2 beds
Also included 2 decal sheets
Download the PDF Instruction Sheet for Set #1
Download the PDF Instruction Sheet for Set #2
Photos of the Finished Kits:
Dodge Power Wagon Kit
The Dodge Power Wagon was mechanically derived from the WC series of 3/4 ton military trucks. Introduced in 1946 as the first postwar civilian production 4x4 truck; it featured an enclosed all-weather cab, an 8-foot cargo bed, 126 inch wheelbase and a 230 cubic inch flathead inline-six engine. There are 2 complete trucks in this kit.3D printed parts Included in the kit (2 of each):
A. chassis
B. cab/cargo bed
C. spare tire
Download the PDF Instruction Sheet.
Photo of Finished Kit:
Ford BB-157 1 1/2 Ton Truck Kit
These are scale model kits of the 1934 BB series truck. The BB series was in production from 1932 to 1934. It was equipped with either the standard four cylinder or the optional “flathead” V-8 (this kit depicts the V-8). The BB-157 indicates the longer wheelbase version (157”) rather than the shorter wheelbase version (131.5”). The kit is available with two different cargo bed/loads, a stake bed with beer kegs or a flat bed with a lumber load.
This is a 4 piece kit which includes a 3D printed chassis, a 3D printed cab, a 3D printed cargo bed and a 3D printed load. Also included, decals.
Download the PDF Instruction Sheet for the Beer Truck.
Download the PDF Instruction Sheet for the Lumber Truck
Photo of Finished Kits:
Home
Page Shipping
Contact
Find a
Retailer
Follow us
